| 1. | The air then passes through heat exchangers where it is cooled to cryogenic temperature
接着空气通过热交换器冷却到低温。 |
| 2. | After been weaved , the fabric were need to go through heat - setting process for stabilize shape and improve the stress
在聚酯织物织造后通常要进行热定型工作，以达到稳定形状，改善应力的目的。 |
| 3. | This paper mainly introduced the research and progress of the technology about heating through heat - carrier during the process of producing bin - oil
本文简要介绍了生物燃油生产过程中热载体加热技术的研究及进展。 |
| 4. | Rapid : time of desiccation and sterilization is obviously shortened by repid temperature - rising , forced - air convection , direct passing of dry and hot air through heated object
迅速：升温快，强迫对流，干热空气直接经过受热物体、干燥、消毒时间明显缩短。 |
| 5. | Attention : no foreign articles are allowed on the receiver ; strictly prevent metal , chemicals or water and alike from falling into the receiver through heat - sink window !
注意：严禁机器上面摆放物品，严防金属、化学物品何水类等通过散热窗落入机器内部！ ！ |
| 6. | It ' s the key technology during the process of producing bio - oil to heat through heat - carrier , whether it ' s advanced or not is connected directly with the cost of bio - oil
摘要热载体加热是生物燃油生产过程中的关键环节，热载体技术先进与否直接关系到生物燃油的生产成本。 |
| 7. | These precipitation - hardened aluminum alloys gain their high strengths through heat treatment involving a severe quenching operation , which introduces a very high level of residual stresses
这些铝合金为获得高强度，必须进行固溶与时效处理，其中在淬火过程中会产生很大的残余应力。 |
| 8. | In order to avoid pollution , we choose polyethylene as the raw material , through heating it in the high temperature and physic extension measure , we get the hollow fiber membrane
中空纤维膜表面分布着0 . 01微米- 0 . 1微米不等的孔径，这些孔径可以去除以往单一的活性炭净水器所不能去除的细菌、铁锈等杂质。 |
| 9. | After forming , they receive adequate surface hardness through heat treatment . such hardening is made possible by carburizing . these case - hardening steels are an important group of materials for mold cavities
成形后,钢经过热处理得到足够的表面硬度,这种硬化常通过渗碳的方式进行,这种表面硬化钢是一种很重要的模具型腔制作材料 |
| 10. | The sublimation ink technology is based on the properties of some pigments to sublime through heat thus permanently colouring the textile fibres or the synthetic materials they get in contact during the sublimation process
升华墨技术是根据某些染料经加热后可气化，染料分子直接进入所接触的面料纤维分子中，从而使面料染色的过程。 |
